Installation Procedure
WARNING: This page is about a different car, the 2019 Chevrolet Traverse. However, it is still accessible from the selected car via links, so may be relevant.
Generator Shield (3) - Install
- Generator Nut (2) - Install and tighten 22 N.m (16 lb ft)
- Generator Bolt (1) - Install and tighten 22 N.m (16 lb ft)
- Raise and support the vehicle. Lifting and Jacking the Vehicle
Generator Bolt (1) - Install and tighten 22 N.m (16 lb ft)
- Lower the vehicle.
Intake Manifold Cover (3) - Install - Intake Manifold Cover Replacement
CAUTION:
Refer to Fastener Caution