Installation Procedure
WARNING: This page is about a different car, the 2019 Chevrolet Traverse. However, it is still accessible from the selected car via links, so may be relevant.
Battery Monitor Module (2) - Install
- Battery Negative Post Clamp Nut (1) - Tighten 4.5 N.m (40 lb in)
Electrical Connector (1) - Connect
Battery Negative Cable (2) - Install
- Battery Negative Cable Nut (1)@Battery Monitor Module (3) - Install and tighten 11 N.m (97 lb in)
- Perform the battery sensor learn procedure. Battery Sensor Module Learn
CAUTION:
Refer to Fastener Caution