LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2018 >> Traverse L >> Repair and Diagnosis >> External Pages >> Different car >> Section 18 (Steering Wheel And Column) >> Diagnostic Information and Procedures >> DTC B1023 >> Circuit/System Verification

Circuit/System Verification

WARNING: This page is about a different car, the 2019 Chevrolet Traverse. However, it is still accessible from the selected car via links, so may be relevant.
  1. Ignition - On/Vehicle - In Service Mode
  2. Clear the DTCs.
  3. Operate the vehicle within the Conditions for Running the DTC. Verify DTC B1023 is not set.
    • If the DTC is set 

      Replace the component: K60 Steering Column Lock Module

    • Go to next step: If the DTC is not set 
  4. All OK.
scientia non olet · About LEMON Manuals