Removal Procedure
- Disconnect the battery negative cable. Battery Negative Cable Disconnection and Connection (KL9)
Air Cleaner Assembly (1) - Remove - Air Cleaner Assembly Replacement
Generator Shield (3) - Remove - Generator Shield Replacement (LTG)
Install the generator nut (1) and finger tighten.
Electrical Connector (1) - Disconnect
-
Drive Belt (1) - Remove - Drive Belt Replacement
- Raise and support the vehicle. Lifting and Jacking the Vehicle
Battery Positive Cable Nut (1) - Remove
- Battery Positive Cable (2) - Remove
- Lower the vehicle.
Generator Nut (1) - Remove
- If necessary, remove the generator mounting stud (2).
- Generator (3) - Remove
NOTE:
Anti-rotation tab is in the 4 o'clock position (arrow).