Sunroof Module Assembly Replacement

GM4441232

Courtesy of GENERAL MOTORS COMPANY

Callout

Component Name

Preliminary Procedures

Sunroof Window Replacement - Front
Do not remove the drain hoses from the vehicle, only disconnect the drain hoses from the front sunroof frame spigots. Sunroof Housing Front Drain Hose Replacement (Left Side) Sunroof Housing Front Drain Hose Replacement (Right Side)
Do not remove the drain hoses from the vehicle, only disconnect the drain hoses from the rear sunroof frame spigots. Sunroof Housing Rear Drain Hose Replacement (Right Rear) Sunroof Housing Rear Drain Hose Replacement (Left Rear)

1

Sunroof Module Bolt [9x]

CAUTION:

Refer to Fastener Caution .

Tighten
9 N.m (80 lb in)

2

Sunroof Module Assembly

Procedure

Disconnect the electrical connectors.
With aid of assistant, remove the sunroof housing from the vehicle and place it on a clean dry prepared surface.
Transfer components as necessary.
Water test and inspect sunroof for proper operation.