LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2018 >> Traverse L >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Memory Modules >> Secondary And Configurable Customer Control System >> Diagnostic Information and Procedures >> Drive Mode Switch Malfunction >> Circuit/System Verification

Circuit/System Verification

  1. Ignition - On/Vehicle - In Service Mode
  2. Operate the component: S126 Drive Mode Select Switch - Rotate Left & Rotate Right

    Verify the following information is correctly displayed: Drive Mode @ A5 Driver Information Center

    • If the component does not work as specified 

      Refer to: Circuit/System Testing - Test 1

    • Go to next step: If the component works as specified 
  3. Operate the component: S126 Drive Mode Select Switch - Rotate Left & Rotate Right

    Verify the following information is correctly displayed: Drive Mode - LED (Light Emitting Diode) @ S126 Drive Mode Select Switch

    • If the component does not work as specified 

      Refer to: Circuit/System Testing - Test 2

    • Go to next step: If the component works as specified 
  4. All OK.
scientia non olet · About LEMON Manuals