Installation Procedure

Install Brake Pressure Modulator Valve (1)

Fig 1: Brake Pressure Modulator Valve
Courtesy of GENERAL MOTORS COMPANY
Install and tighten Electronic Brake Control Module Bolts (1) (Qty: 4) to 3 N.m (27 lb in)

Fig 2: Electronic Brake Control Module Bolts
Courtesy of GENERAL MOTORS COMPANY

CAUTION: Refer to Fastener Caution
Install Brake Pressure Modulator Valve Bracket (1)

Fig 3: Brake Pressure Modulator Valve Bracket
Courtesy of GENERAL MOTORS COMPANY
Install and tighten Brake Pressure Modulator Valve Bolt (1) to 10 N.m (89 lb in)

Fig 4: Brake Pressure Modulator Valve Bolt
Courtesy of GENERAL MOTORS COMPANY
Install Brake Pressure Modulator Valve Assembly (1)

Fig 5: Brake Pressure Modulator Valve Assembly
Courtesy of GENERAL MOTORS COMPANY
Install and tighten Brake Pressure Modulator Valve Bracket Bolts (1) (Qty: 3) to 22 N.m (16 lb ft)

Fig 6: Brake Pressure Modulator Valve Bracket Bolts
Courtesy of GENERAL MOTORS COMPANY
Install and tighten Left Front Brake Pipe Fitting (1) to 18 N.m (13 lb ft)

Fig 7: Left Front Brake Pipe Fitting
Courtesy of GENERAL MOTORS COMPANY
Install and tighten Right Front Brake Pipe Fitting (1) to 18 N.m (13 lb ft)

Fig 8: Right Front Brake Pipe Fitting
Courtesy of GENERAL MOTORS COMPANY
Install and tighten Right Rear Brake Pipe Fitting (1) to 18 N.m (13 lb ft)

Fig 9: Right Rear Brake Pipe Fitting
Courtesy of GENERAL MOTORS COMPANY
Install and tighten Left Rear Brake Pipe Fitting (1) to 18 N.m (13 lb ft)

Fig 10: Left Rear Brake Pipe Fitting
Courtesy of GENERAL MOTORS COMPANY
Install and tighten Brake Pressure Modulator Valve Primary Pipe Fitting (1) to 32 N.m (24 lb ft)

Fig 11: Brake Pressure Modulator Valve Primary Pipe Fitting
Courtesy of GENERAL MOTORS COMPANY
Install and tighten Brake Pressure Modulator Valve Secondary Pipe Fitting (1) to 32 N.m (24 lb ft)

Fig 12: Brake Pressure Modulator Valve Secondary Pipe Fitting
Courtesy of GENERAL MOTORS COMPANY
Connect the EBCM electrical connector.
Bleed the brake system. Refer to Antilock Brake System Automated Bleed
Program the EBCM. Refer to Control Module References
Calibrate the BPMV pressure sensor. Refer to Brake Pressure Modulator Valve Pressure Sensor Calibration