LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2018 >> Suburban 3500 HD LT >> Repair and Diagnosis >> Body & Frame >> Body, Cab Control Systems >> Power Door Lock System And Release System - Repair Instructions >> Repair Instructions >> Front Side Door Latch Replacement >> Removal Procedure

Removal Procedure

  1. Remove the front side door pull handle bracket. Refer to Front Side Door Pull Handle Bracket Replacement .
  2. Remove the front side door water deflector.
    3. NOTE:

    Disconnect the window from the window regulator, place the window in the full up position, use masking tape to tape the window to the upper door frame.

  3. Position the front side door window regulator rear rail to access and remove the door latch and handle bracket assembly. Refer to Front Side Door Window Regulator Replacement .
  4. Remove the front side door window channel retainer. Refer to Front Side Door Window Channel Retainer Replacement .
  5. Remove the front side door outside handle. Refer to Front Side Door Outside Handle Replacement (without ATH) Front Side Door Outside Handle Replacement (with ATH) .
  6. Remove the front side door outside handle bracket screw. Refer to Front Side Door Outside Handle Bracket Replacement .
  7. Remove the front side door locking rod knob. Refer to Front Side Door Locking Rod Knob Replacement .
  8. Disconnect the front side door latch electrical connector.
    9. Fig 1: Front Side Door Latch & Bolts
    GM2725236Courtesy of GENERAL MOTORS COMPANY
  9. Remove the four bolts (1) from the front side door latch.
    10. Fig 2: Front Side Door Latch & Handle Bracket
    GM2725373Courtesy of GENERAL MOTORS COMPANY
  10. Remove the outside handle bracket (1) and the front side door latch (2) as assembly from the vehicle.
scientia non olet · About LEMON Manuals