Circuit/System Verification
- Ignition - On/Vehicle - In Service Mode
- Verify the scan tool parameter: Trunk Lid/Liftgate Window Exterior Unlatch Switch = Inactive
- If not the specified state
Refer to: Circuit/System Testing
- Go to next step: If the specified state
- If not the specified state
- Operate the component: {With B9U} S46 Liftgate Handle Switch - Pressed
Verify the scan tool parameter: Trunk Lid/Liftgate Window Exterior Unlatch Switch = Active
- If not the specified state
Refer to: Circuit/System Testing
- Go to next step: If the specified state
- If not the specified state
- Operate the component: {With A60} B85 Rear Compartment Lid Key Cylinder Switch - Unlatch
Verify the scan tool parameter: Trunk Lid/Liftgate Window Exterior Unlatch Switch = Active
- If not the specified state
Refer to: Circuit/System Testing
- Go to next step: If the specified state
- If not the specified state
- All OK.