Circuit/System Verification

Ignition - On/Vehicle - In Service Mode
Verify DTC B3205 4B is not set.
- If DTC B3205 4B is set
  Use the following procedure: Window Motor Programming - Express Function .
- Go to next step: If the DTC is not set
Operate the component: Driver Left Front Window Switch @ S79D Window Switch - Driver - Pressed & Pulled
Verify the component works as specified:
- M74D Window Motor - Driver = Up
- M74D Window Motor - Driver = Express Up
- M74D Window Motor - Driver = Down
- M74D Window Motor - Driver = Express Down
- If the component does not work as specified
  Refer to: Circuit/System Testing - Test 1
- Go to next step: If the component works as specified
Operate the component: Right Front Window Switch @ S79D Window Switch - Driver - Pressed & Pulled
Verify the component operates in both directions:
- M74P Window Motor - Passenger = Up
- M74P Window Motor - Passenger = Down
- If the component does not work as specified
  Refer to: Circuit/System Testing - Test 2
- Go to next step: If the component works as specified
Operate the component: S79P Window Switch - Passenger - Pressed & Pulled
Verify the component operates in both directions:
- M74P Window Motor - Passenger = Up
- M74P Window Motor - Passenger = Down
- If the component does not work as specified
  Refer to: Circuit/System Testing - Test 3
- Go to next step: If the component works as specified
Operate the component: Left Rear Window Switch @ S79D Window Switch - Driver - Pressed & Pulled
Verify the component operates in both directions:
- M74LR Window Motor - Left Rear = Up
- M74LR Window Motor - Left Rear = Down
- If the component does not work as specified
  Refer to: Circuit/System Testing - Test 4
- Go to next step: If the component works as specified
Window Lockout Switch = Not Activated
Operate the component: S79LR Window Switch - Left Rear - Pressed & Pulled
Verify the component operates in both directions:
- M74LR Window Motor - Left Rear = Up
- M74LR Window Motor - Left Rear = Down
- If the component does not work as specified
  Refer to: Circuit/System Testing - Test 4
- Go to next step: If the component works as specified
Operate the component: Right Rear Window Switch @ S79D Window Switch - Driver - Pressed & Pulled
Verify the component operates in both directions:
- M74RR Window Motor - Right Rear = Up
- M74RR Window Motor - Right Rear = Down
- If the component does not work as specified
  Refer to: Circuit/System Testing - Test 5
- Go to next step: If the component works as specified
Window Lockout Switch = Not Activated
Operate the component: S79RR Window Switch - Right Rear - Pressed & Pulled
Verify the component operates in both directions:
- M74RR Window Motor - Right Rear = Up
- M74RR Window Motor - Right Rear = Down
- If the component does not work as specified
  Refer to: Circuit/System Testing - Test 5
- Go to next step: If the component works as specified
Operate the component: Window Lockout Switch - Pressed
Verify the function:
- S79LR Window Switch - Left Rear = Disabled
- S79RR Window Switch - Right Rear = Disabled
- If not the specified state
  Refer to: Circuit/System Testing - Test 6
- Go to next step: If the specified state
All OK.