Installation Procedure
Align the crank arm and transmission link rod so that crank arm (1) and link rod (2) are in straight line.
- Use a wiper linkage installer or similar tool, install the transmission link rod onto the wiper motor crank arm stud.
Install the windshield wiper motor bolt (1) and tighten bolt to 9 N.m (80 lb in).
- Install the windshield system module nut (2) and tighten nut to 19 N.m (14 lb ft).
- Windshield Wiper Transmission Replacement - - Install
- Air Inlet Grille Panel Replacement - - Install
- Windshield Wiper Arm Replacement - - Install
- Inspect the windshield wiper operation.