Installation Procedure
Install the throttle fasteners (2) along with a NEW throttle body seal ring (1).
- Install the 4 throttle body fastener (3) and tighten to 8 N.m (71 lb in).
- Install the charge air cooler outlet air hose to the throttle body. Refer to Charge Air Cooler Outlet Air Hose Replacement .
- Connect the throttle body wiring harness connector.
- Perform the intake system learned values reset. Intake System Learned Values Reset
- Perform the throttle body idle air flow compensation reset. Throttle Body Idle Air Flow Compensation Reset
CAUTION:
Refer to Fastener Caution .