LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2018 >> Silverado 1500 SSV, 4WD, Part Time T/Case Control, Gas >> Repair and Diagnosis >> Steering >> Steering Column >> Steering Wheel And Column >> Repair Instructions >> Transmission Control Replacement >> Installation Procedure

Installation Procedure

    Fig 1: Automatic Transmission Control And Bolts
    GM3274361Courtesy of GENERAL MOTORS COMPANY
  1. Position the automatic transmission control (2) on the steering column.
    2. CAUTION:

    Refer to Fastener Caution .

  2. Install the automatic transmission control bolts (1) and tighten to 10 N.m (89 lb in).
    3. Fig 2: Automatic Transmission Park Lock Cable And Retainer
    GM3274356Courtesy of GENERAL MOTORS COMPANY
  3. Connect the automatic transmission park lock cable (2) to the ignition lock cylinder case.
    1. Place the ignition lock cylinder in the OFF-LOCK position.
    2. Place the automatic transmission control in the PARK position.
    3. Push the automatic transmission park lock cable into the ignition lock cylinder case until the lock tab engages.
  4. Install the automatic transmission park lock cable lock clip (1).
  5. Connect the range selector lever cable. Range Selector Lever Cable Replacement
    6. Fig 3: Automatic Transmission Shift Lock Control Solenoid
    GM3274348Courtesy of GENERAL MOTORS COMPANY
  6. Connect the automatic transmission shift lock control solenoid (1) to the automatic transmission control bracket. Automatic Transmission Shift Lock Control Actuator Replacement
    7. Fig 4: Cable, Steering Column Ball Stud And Steering Column Bracket
    GM1774419Courtesy of GENERAL MOTORS COMPANY
  7. Install the automatic transmission range selector lever cable lever. Range Selector Lever Cable Lever Replacement 
  8. Steering Column - Install - Steering Column Replacement 
scientia non olet · About LEMON Manuals