LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2018 >> Impala Premier, Gas/Ethanol >> Repair and Diagnosis >> Body & Frame >> Body, Cab Control Systems >> Power Door Lock System And Release Systems >> Diagnostic Information and Procedures >> DTC B2730 >> Component Testing

Component Testing

  1. Ignition/Vehicle - Off
  2. Disconnect the appropriate electrical connector:
    • S58B Rear Compartment Lid Unlatch Switch - Interior
    • S48A Multifunction Switch - Instrument Panel
  3. Test for infinite resistance between the test points:
    • S58B Rear Compartment Lid Unlatch Switch - Interior: Signal terminal 1 & Ground terminal 2 - The switch is in the open position.
    • S48A Multifunction Switch - Instrument Panel: Signal terminal 7 & Ground terminal 2 - The switch is in the open position.
    • If less than infinite resistance 

      Replace the component: S58B Rear Compartment Lid Unlatch Switch - Interior/S48A Multifunction Switch - Instrument Panel

    • Go to next step: If infinite resistance 
  4. Test for less than 3 ohms between the test points:
    • S58B Rear Compartment Lid Unlatch Switch - Interior: Signal terminal 1 & Ground terminal 2 - The switch is in the closed position.
    • S48A Multifunction Switch - Instrument Panel: Signal terminal 7 & Ground terminal 2 - The switch is in the closed position.
    • If 3 ohms or greater 

      Replace the component: S58B Rear Compartment Lid Unlatch Switch - Interior/S48A Multifunction Switch - Instrument Panel

    • Go to next step: If less than 3 ohms 
  5. All OK.
scientia non olet · About LEMON Manuals