LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2018 >> Cruze LS, Standard Trans >> Repair and Diagnosis >> Suspension >> Front Suspension >> Front Suspension System >> Repair Instructions >> Lower Control Arm Replacement >> Removal Procedure

Removal Procedure

  1. Remove the front tire and wheel assemblies. Tire and Wheel Removal and Installation
  2. If equipped with the front leveling position sensor, disconnect the electrical connector.
  3. GM3665593
    NOTE:

    Support the lower control arm ball joint with a hydraulic jack.

    Nut (1) - Loosen

  4. GM3665597

    CH-42188-B  separator (2)@Steering Knuckle(1) - Install

  5. Separate the steering knuckle from the lower ball joint.
  6. GM3665592
    NOTE:

    If necessary turn the steering knuckle in position.

    Bolt (1)@Front Lower Control Arm Bushing(2) - Remove and DISCARD[2x]

  7. GM3665594
    NOTE:

    Hold against the nuts (1) to release the bolts (2). Use a suitable tool.

    Bolt(2) - Remove and DISCARD[2x]

  8. Nut(1) - Remove and DISCARD[2x]