Installation Procedure
Fuse Block (2) - Install
- Install the body wiring harness and the 5 body wiring harness nuts (1) and tighten to 8 N.m (71 lb in).
- Battery to Fuse Block Cable Replacement - Install
Install the positive battery cable to starter (2).
- Install the positive battery cable to starter bolt (1) and tighten to 15 N.m (11 lb ft).
Close the battery fuse box cover and lock the retaining tabs.
- Radio Rear Compartment Speaker - Install - Radio Rear Compartment Speaker Replacement
- Rear Compartment Floor Panel Trim Support - Install - Rear Compartment Floor Panel Trim Support Replacement
- Battery Negative Cable Disconnection and Connection - Connect the battery negative cable.
CAUTION:
Refer to Fastener Caution