Removal Procedure
- Battery Negative Cable Disconnection and Connection - Disconnect
- Front Bumper Fascia Replacement - Remove
- Charge Air Cooler Inlet Air Hose@Charge Air Cooler - Remove - Charge Air Cooler Inlet Air Hose Replacement
- Charge Air Cooler Outlet Air Hose@Charge Air Cooler - Remove - Charge Air Cooler Outlet Air Hose Replacement
Disconnect the electrical connector.(1)
Engine Coolant Fan Shroud Bolt(1, 2) - Remove[2x]
- Raise the vehicle.
Pull up the engine coolant fan shroud (1) until it can be put out of the 4 retaining tabs (2, 3).
Tilt the engine coolant fan shroud (1) as much as possible.
- Retain the engine coolant fan shroud.
Disconnect the electrical connector.(1)
- NOTE:
A second technician is required.
Retainer Clip(1) - Unclip[2x]
Charge Air Cooler(2)@Radiator Assembly(1) - Remove