Installation Procedure
Multifunction Power Supply Converter(1) - Install
Fuel Pump Power Control Module Bracket(1) - Install
Electrical Connector(2) - Connect
- Electrical Connector(1) - Connect
Electrical Connector(1) - Install
Retainer(1) - Install[2x]
Connect the electrical connectors.(1)
Install the battery positive cable terminal (1).
- CAUTION:
Battery Positive Cable(1) - Install
- Battery Positive Cable Bolt(2) - Install and tighten 15 N.m (11 lb ft)
Battery Positive Cable Terminal Cover(1) - Install
Radio Rear Compartment Speaker(3) - Install - Radio Rear Compartment Speaker Replacement
- Connect the battery negative cable. Battery Negative Cable Disconnection and Connection