Fastener Specifications (Gasoline)
Single Use Non-Threaded Fasteners/Components
|
NOTE:
All fasteners/components listed in this table MUST BE DISCARDED and replaced with NEW after removal. |
|---|
| Application |
| Catalytic Converter Gasket |
| Exhaust Front Pipe Gasket |
Single Use Threaded Fastener/Component Tightening Specifications
|
NOTE:
All fasteners/components listed in this table MUST BE DISCARDED and replaced with NEW after removal. |
|
|---|---|
| Application | Specification |
| Metric (English) | |
| Catalytic Converter Clamp | 15 N.m (11 lb ft) |
| Catalytic Converter Nut | 22 N.m (16 lb ft) |
| Exhaust Pipe Clamp | 31 N.m (23 lb ft) |
| Transmission Mount Strut Bolt | |
|
100 N.m (74 lb ft) |
|
90 - 105 degrees |
Reusable Threaded Fastener Tightening Specifications
|
NOTE:
All fasteners listed in this table can be reused after removal. |
|
|---|---|
| Application | Specification |
| Metric (English) | |
| Catalytic Converter Brace Bracket Bolt | 22 N.m (16 lb ft) |
| Catalytic Converter Brace Bracket Nut | 22 N.m (16 lb ft) |
| Exhaust Front Pipe Nut | 22 N.m (16 lb ft) |
| Exhaust Muffler Hanger Bracket Nut | 22 N.m (16 lb ft) |
| Exhaust Muffler Insulator Nut | 22 N.m (16 lb ft) |
| Exhaust Muffler Nut | 22 N.m (16 lb ft) |
| Exhaust Muffler To Front Pipe Nut | 22 N.m (16 lb ft) |