LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2018 >> Corvette Z51, 2D Convertible, Standard Trans >> Repair and Diagnosis >> Brakes >> Traction Control >> Antilock Brake System >> Repair Instructions >> Brake Pressure Modulator Valve Bracket Replacement >> Removal Procedure

Removal Procedure

  1. Place the ignition in the OFF position.
  2. Remove the air cleaner outlet duct. Refer to Air Cleaner Outlet Duct Replacement (LT1)Air Cleaner Outlet Duct Replacement (LT4) .
  3. GM3318482
    NOTE:

    It is not necessary to remove the BPMV assembly nuts.

    Loosen the 2 BPMV assembly nuts (1).

  4. GM3318484

    Without disconnecting the hydraulic brake pipes, lift the BPMV assembly (1) straight upward and release the assembly from the BPMV bracket.

  5. Secure the BPMV assembly with heavy mechanics wire.
  6. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle .
  7. GM3354929

    Remove the BPMV bracket bolts (1).

  8. GM3354935

    Remove the BPMV bracket (1).

scientia non olet · About LEMON Manuals