Circuit/System Verification
- Ignition - On / Vehicle - In Service Mode
- Verify the scan tool parameter: Rear Defogger Switch = Off
- If Not The Specified State
Test or replace the component: A26 HVAC Controls
- Go To Next Step: If The Specified State
- If Not The Specified State
- Operate the component: Rear Defogger Switch - Pressed
Verify the scan tool parameter: Rear Defogger Switch = On
- If Not The Specified State
Test or replace the component: A26 HVAC Controls
- Go To Next Step: If The Specified State
- If Not The Specified State
- Perform the scan tool control function: Rear Defogger - On and Off
Verify the component turns On and Off: E18 Rear Defogger Grid
- If The Component Does Not Turn On And Off
Refer to: Circuit/System Testing
- Go To Next Step: If The Component Turns On And Off
- If The Component Does Not Turn On And Off
- All OK.