Fastener Specifications
Single Use Threaded Fastener/Component Tightening Specifications
|
NOTE:
All fasteners/components listed in this table MUST BE DISCARDED and replaced with NEW after removal. |
|
|---|---|
| Application | Specification |
| Metric (English) | |
| Clutch Pressure Plate Bolts. Clutch pressure plate bolts must be tightened in sequence and in even increments over the specified passes. Reference the repair procedure. |
|
|
15 N.m (11 lb ft) |
|
35 N.m (26 lb ft) |
|
70 N.m (52 lb ft) |
Reusable Threaded Fastener Tightening Specifications
|
NOTE:
All fasteners listed in this table can be reused after removal. |
|
|---|---|
| Application | Specification |
| Metric (English) | |
| Clutch Actuator Cylinder Mounting Bolts | 12 N.m (106 lb in) |
| Clutch Pedal Bracket Mounting Nuts | 27 N.m (20 lb ft) |
| Clutch Pedal Nut | 50 N.m (37 lb ft) |
| Cruise Control Release Switch Bracket Retaining Bolts | 12 N.m (106 lb in) |
| Driver Foot Rest Bracket Retaining Bolt | 8 N.m (71 lb in) |
| Driver Foot Rest Bracket Retaining Nut | 10 N.m (89 lb in) |
| Engine Flywheel Inspection Cover Retaining Bolts | 25 N.m (18 lb ft) |
| Negative Battery Cable Bolt | 15 N.m (11 lb ft) |