LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2018 >> City Express LS >> Repair and Diagnosis >> Accessories & Equipment >> Memory Modules >> Secondary And Configurable Customer Control System >> Diagnostic Information And Procedures >> Steering Wheel Controls Malfunction (Without Navigation Radio) >> Component Testing

Component Testing

  1. Ignition OFF, disconnect the X3 harness connector at the X85 Steering Wheel Air Bag Coil.
  2. Test the resistance between the signal circuit terminal 2 and the low reference circuit terminal 5 while pressing the appropriate steering wheel controls switch button listed below:
    Function Switch Minimum Resistance Value Maximum Resistance Value
    Phone Send 710 Ω 740 Ω
    Source Switch .5 Ω 3 Ω
    Seek Down 305 Ω 340 Ω
    Seek Up 110 Ω 135 Ω
    • If not the specified value 

      Replace the S70L Steering Wheel Controls Switch - Left.

    • Go to next step: If the specified value 
  3. Test the resistance between the signal circuit terminal 3 and the low reference circuit terminal 5 while pressing the appropriate steering wheel controls switch button listed below:
    Function Switch Minimum Resistance Value Maximum Resistance Value
    Hang Up-Mute 305 Ω 340 Ω
    Volume Down .5 Ω 3 Ω
    Volume Up 110 Ω 135 Ω
    No Switch Pressed Infinite Infinite
    • If not the specified value 

      Replace the S70L Steering Wheel Controls Switch - Left.

    • Go to next step: If the specified value 
  4. All OK