LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2018 >> Camaro SS, 2D Convertible, Standard Trans >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 15 (Shift Lock Control System) >> Diagnostic Information and Procedures >> Transmission Control Lever Malfunction >> Circuit/System Verification

Circuit/System Verification

WARNING: This page is about a different variant/trim than selected.
  1. Ignition - On / Vehicle - In Service Mode
  2. Verify the scan tool parameter: Brake Pedal Applied = Inactive
    • Go to next step: If the specified state 
  3. Operate the component: Brake Pedal - Pressed

    Operate the component: S3 Transmission Shift Lever - Park & Drive

    • If not the specified state 

      Refer to: Circuit/System Testing

    • Go to next step: If the specified state 
  4. All OK.
scientia non olet · About LEMON Manuals