Installation Procedure

Courtesy of GENERAL MOTORS COMPANY

Battery Positive Cable (1) - Install
Courtesy of GENERAL MOTORS COMPANY

CAUTION:
Refer to Fastener Caution .

Battery Positive Cable Retainer (3) - Attach
Battery Positive Cable Nut (1) - Install and tighten 15N.m (11 lb ft)
Battery Positive Cable Protector (2) - Install
Courtesy of GENERAL MOTORS COMPANY

Battery Positive Cable Retainer (2) - Attach
Battery Positive Cable Nut (1) - Install and tighten 22N.m (16 lb ft)
Courtesy of GENERAL MOTORS COMPANY

Fuse Block Cover (1) - Install
Courtesy of GENERAL MOTORS COMPANY

Battery Retainer Assembly (2) - Install
Battery Retainer Assembly Bolt (1) - Install and tighten 8N.m (71 lb in)
Courtesy of GENERAL MOTORS COMPANY

Body Wiring Harness Connector (2) @Battery Distribution Fuse Block - Connect
Body Wiring Harness Nut (1) @ Battery Distribution Fuse Block - Install and tighten 5N.m (44 lb in)
Courtesy of GENERAL MOTORS COMPANY

Battery Tray Support (2) - Install
Battery Tray Support Nut (1) - Install and tighten 9N.m (80 lb in)
Courtesy of GENERAL MOTORS COMPANY

Battery Positive Cable (3) @ Battery Post - Install
Battery Positive Cable Clamp Fastener - Install and tighten 5N.m (44 lb in)
Battery Positive Cable Protective Cover (1) - Install
Connect the battery negative cable. Battery Negative Cable Disconnection and Connection