Fastener Specifications
Single Use Threaded Fastener/Component Tightening Specifications
|
NOTE:
All fasteners/components listed in this table MUST BE DISCARDED and replaced with NEW after removal. |
|
|---|---|
| Application | Specification |
| Metric (English) | |
| Front Lower Control Arm Front Bolt | |
|
100 N.m (74 lb ft) |
|
45 - 60 Degrees |
| Front Lower Control Arm Rear Bolt | |
| Front Stabilizer Shaft Insulator Clamp Bolt | |
|
22 N.m (16 lb ft) |
|
30 - 45 Degrees |
| Front Suspension Strut Mount Bolt | |
|
22 N.m (16 lb ft) |
|
30 - 45 Degrees |
| Front Suspension Strut Mount Nut | |
| Steering Knuckle Bolt@Strut Assembly | |
| Wheel Stud | |
Reusable Threaded Fastener Tightening Specifications
|
NOTE:
All fasteners listed in this table can be reused after removal. |
|
|---|---|
| Application | Specification |
| Metric (English) | |
| Front Lower Control Arm Rear Nut | |
|
100 N.m (74 lb ft) |
|
30 - 45 Degrees |
| Front Stabilizer Shaft Link Nut | 65 N.m (48 lb ft) |
| Front Suspension Strut Lower Mounting Nut | 70 N.m (52 lb ft) |
| Front Wheel Bearing and Hub Assembly Bolt | |
|
100 N.m (74 lb ft) |
|
15 - 30 Degrees |
| Steering Knuckle Nut@Front Lower Control Arm | |
|
35 N.m (26 lb ft) |
|
30 - 45 Degrees |
| Steering Knuckle Nut@Strut Assembly | |
|
100 N.m (74 lb ft) |
|
45 - 60 Degrees |