LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2017 >> Volt Premier >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Controls And Fuel - 1.5L (L3A) - Repair Instructions >> Repair Instructions >> Throttle Body Assembly Replacement >> Installation Procedure

Installation Procedure

    Fig 1: Gasket And Intake Manifold
    GM4091035Courtesy of GENERAL MOTORS COMPANY
  1. Clean the intake manifold mating surfaces.(2)
  2. Install NEW Throttle Body Gasket (1)
    3. Fig 2: Throttle Body, Electrical Connector And Bolts
    GM4091036Courtesy of GENERAL MOTORS COMPANY
  3. Install Throttle Body (3)
    4. CAUTION:

    Refer to Fastener Caution .

  4. Install Throttle Body Bolt (1) and tighten 10 N.m (89 lb in)
  5. Connect Electrical Connector (2)
  6. Install Air Cleaner Outlet Duct Air Cleaner Outlet Duct Replacement 
  7. Install Dash Upper Extension Panel Opening Cover Dash Upper Extension Panel Opening Cover Replacement
  8. Enable the high voltage system. High Voltage Disabling
  9. Perform the throttle or idle learn. Throttle or Idle Learn 
scientia non olet · About LEMON Manuals