LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2017 >> Volt Premier >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Controls And Fuel - 1.5L (L3A) - Repair Instructions >> Repair Instructions >> Fuel Tank Replacement >> Disassemble Procedure

Disassemble Procedure

    Fig 1: Fuel Pump Feed Hose, Evaporative Emission Canister Hose, Evaporative Emission Rear Hose, Electrical Connector, Fuel Pump Module Wiring Harness And Retainers
    GM4091018Courtesy of GENERAL MOTORS COMPANY
  1. Remove Retainer (2, 5, 7)
  2. Remove Fuel Pump Fuel Feed Hose (8) -Plastic Collar Quick Connect Fitting Service 
  3. Remove the evaporative emission canister hose (1). Refer to Plastic Collar Quick Connect Fitting Service .
  4. Remove Evaporative Emission Rear Hose (3) Plastic Collar Quick Connect Fitting Service 
  5. Disconnect the electrical connector (6) and remove the fuel tank fuel pump module wiring harness (4).
  6. Remove Fuel Tank Fuel Pump Module Replacement 
    7. Fig 2: Fuel Tank Heat Shield
    GM4091019Courtesy of GENERAL MOTORS COMPANY
  7. Remove Fuel Tank Heat Shield (1)
scientia non olet · About LEMON Manuals