LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2017 >> Volt Premier >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Controls And Fuel - 1.5L (L3A) - Repair Instructions >> Repair Instructions >> Fuel Pressure Sensor Replacement >> Removal Procedure

Removal Procedure

  1. Relieve the fuel system pressure. Fuel Pressure Relief 
  2. Remove Underbody Front Air Deflector Replacement - Left Side
  3. Fig 1: Fuel Pressure Sensor, Seal Ring And Electrical Connector
    GM4091047Courtesy of GENERAL MOTORS COMPANY
  4. Disconnect the electrical connector.(1)
  5. Place a drain pan under the vehicle.
  6. Remove Fuel Pressure Sensor(2)
  7. Remove Seal Ring(3) and DISCARD