Installation Procedure
Courtesy of GENERAL MOTORS COMPANY
- Connect the 4 fuel injector wiring harness electrical connectors (9, 11) to the 4 fuel injectors (10).
- Clip in the fuel injector wiring harness (6) to the fuel rail (7).
- Install NEW 4 cable ties (8, 12) to the position where they have been removed.
- Connect the fuel injection fuel rail fuel pressure sensor wiring harness plug (2) to the fuel rail fuel pressure sensor (4).
- Install a NEW cable tie (3) to the position where it have been removed.
- Install 4 NEW insulating tape stripes (1, 5) to the position where it have been removed.
- Install Fuel Injection Fuel Rail Assembly Replacement