Removal Procedure
WARNING:
WARNING:
- Relieve the fuel system pressure. Fuel Pressure Relief
- Disconnect Battery Negative Cable Disconnection and Connection
- Disconnect Fuel Feed Front Pipe (3) @Fuel Feed Pipe (2) -Metal Collar Quick Connect Fitting Service
- Close all open connections with the EN-6015 plugs.
- Open the retainer (1).
- Remove Fuel Feed Pipe (2) @Retainer (1)
- Raise and support the vehicle. Lifting and Jacking the Vehicle
- Remove Underbody Rear Air Deflector Replacement
- Remove Underbody Front Air Deflector Replacement - Left Side
- Remove Drivetrain and Front Suspension Cradle Replacement
- Open the 2 retainers (1).
- Remove Fuel Feed Pipe (2) @Retainer (1)
- Open the retainer (1).
- Fuel Feed Pipe (3) @Retainer (1)
- Disconnect the electrical connector.(2)
- Open the retainer (2).
- Disconnect Fuel Feed Pipe (1) @Fuel Pump Fuel Feed Hose (3) Plastic Collar Quick Connect Fitting Service
- Close all open connections with the EN-6015 plugs.
- Remove Fuel Feed Pipe (1) @Retainer (2)
- Open the 3 retainers (1).
- Remove Fuel Feed Pipe (2) @Retainer (1)
- Remove the fuel feed pipe (2) from the vehicle.