Installation Procedure
- Install the fuel feed pipe (2) to the vehicle.
- Install Fuel Feed Pipe (2) @Retainer(1)
- Close the 3 retainers (1).
- Install Fuel Feed Pipe(1)@Retainer(2)
- Remove all EN-6015 plugs from the connections.
- Connect Fuel Feed Pipe(1)@Fuel Pump Fuel Feed Hose(3)Plastic Collar Quick Connect Fitting Service
- Close the retainer (2).
- Connect the electrical connector.(2)
- Install Fuel Feed Pipe(3)@Retainer(1)
- Close the retainer (1).
- Install Fuel Feed Pipe(2)@Retainer(1)
- Close the 2 retainers (1).
- Install Drivetrain and Front Suspension Cradle Replacement
- Install Underbody Front Air Deflector Replacement - Left Side
- Install Underbody Rear Air Deflector Replacement
- Lower the vehicle.
- Install Fuel Feed Pipe (2) @Retainer (1)
- Close the retainer (1).
- Remove all EN-6015 plugs from the connections.
- Connect Fuel Feed Front Pipe (3) @Fuel Feed Pipe (2)Metal Collar Quick Connect Fitting Service
- Connect Battery Negative Cable Disconnection and Connection
- Cycle the ignition to run the fuel pump and check for fuel leaks.