LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2017 >> Volt Premier >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Controls And Fuel - 1.5L (L3A) - Repair Instructions >> Repair Instructions >> Exhaust Gas Recirculation Valve Replacement >> Removal Procedure

Removal Procedure

  1. Remove Exhaust Gas Recirculation Cooler Temperature Sensor Replacement - Position 1 
  2. Drain the cooling system. Cooling System Draining and Filling
    3. Fig 1: Engine Wiring Harness Bracket, Bolt, Nut And Electrical Connector
    GM4091546Courtesy of GENERAL MOTORS COMPANY
  3. Remove Engine Wiring Harness Bracket Bolt (1)
  4. Remove Engine Wiring Harness Bracket Nut (3)
  5. Position aside Engine Wiring Harness Bracket (4) -
  6. Disconnect the electrical connector.(2)
    7. Fig 2: EGR Valve Bolts, Cooling Return Hose, Clamp And EGR Cooler Bolts
    GM4091548Courtesy of GENERAL MOTORS COMPANY
  7. Loosen Clamp (6)
  8. Disconnect Exhaust Gas Recirculation Valve Cooling Return Hose (5)
  9. Remove Exhaust Gas Recirculation Cooler Bolt (4)
  10. Exhaust Gas Recirculation Valve Bolt (2, 3)
    11. Fig 3: Exhaust Gas Recirculation Valve And Gaskets
    GM4091549Courtesy of GENERAL MOTORS COMPANY
  11. Remove Exhaust Gas Recirculation Valve (1)
  12. Remove Gasket (2, 3)
scientia non olet · About LEMON Manuals