LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2017 >> Volt Premier >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Controls And Fuel - 1.5L (L3A) - Repair Instructions >> Repair Instructions >> Exhaust Gas Recirculation Valve Replacement >> Installation Procedure

Installation Procedure

    Fig 1: Exhaust Gas Recirculation Valve And Gaskets
    GM4091549Courtesy of GENERAL MOTORS COMPANY
  1. Install Gasket (2, 3)
  2. Install Exhaust Gas Recirculation Valve (1)
    3. Fig 2: EGR Valve Bolts, Cooling Return Hose, Clamp And EGR Cooler Bolts
    GM4091548Courtesy of GENERAL MOTORS COMPANY
  3. Install Exhaust Gas Recirculation Valve Bolt (2, 3)
  4. Install Exhaust Gas Recirculation Cooler Bolt (4)
    5. CAUTION:

    Fastener Caution

  5. Exhaust Gas Recirculation Valve Bolt (2, 3) - Tighten 10 N.m (89 lb in)
  6. Exhaust Gas Recirculation Cooler Bolt (4) - Tighten 10 N.m (89 lb in)
  7. Connect Exhaust Gas Recirculation Valve Cooling Return Hose (5)
  8. Tighten Clamp (6)
    9. Fig 3: Engine Wiring Harness Bracket, Bolt, Nut And Electrical Connector
    GM4091546Courtesy of GENERAL MOTORS COMPANY
  9. Install Engine Wiring Harness Bracket (4)
  10. Connect the electrical connector.(2)
  11. Install Engine Wiring Harness Bracket Nut (3) and tighten 9 N.m (80 lb in)
  12. Install Engine Wiring Harness Bracket Bolt (1) and tighten 9 N.m (80 lb in)
  13. Fill the cooling system. Cooling System Draining and Filling
  14. Install Exhaust Gas Recirculation Cooler Temperature Sensor Replacement - Position 1 
scientia non olet · About LEMON Manuals