LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2017 >> Volt Premier >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Controls And Fuel - 1.5L (L3A) - Repair Instructions >> Repair Instructions >> Exhaust Gas Recirculation Cooler Temperature Sensor Replacement - Position 1 >> Installation Procedure

Installation Procedure

    Fig 1: EGR Cooler Temperature Sensor, Wiring Harness, EGR Cooler, Camshaft Cover Bracket And Electrical Connector
    GM4091551Courtesy of GENERAL MOTORS COMPANY
    CAUTION:

    Fastener Caution

  1. Install Exhaust Gas Recirculation Cooler Temperature Sensor (4) and tighten 42 N.m (31 lb ft)
  2. Install Exhaust Gas Recirculation Cooler Temperature Sensor Wiring Harness@Camshaft Cover Bracket (2)
  3. Connect the electrical connector.(1)
  4. Install Intake Manifold Cover Replacement
  5. Connect Battery Negative Cable Disconnection and Connection
scientia non olet · About LEMON Manuals