LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2017 >> Volt Premier >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Controls And Fuel - 1.5L (L3A) - Repair Instructions >> Repair Instructions >> Engine Coolant Temperature Sensor Replacement - Water Outlet >> Installation Procedure

Installation Procedure

    Fig 1: Engine Coolant Temperature Sensor, Electrical Connector, Retainer And Seal
    GM4091507Courtesy of GENERAL MOTORS COMPANY
  1. Install a NEW seal.(1)
  2. Install the engine coolant temperature sensor.(2)
  3. Install Engine Coolant Temperature Sensor Retainer (4)
  4. Connect the engine coolant temperature sensor electrical connector.(3)
    5. Fig 2: Heater Outlet Hose Clamp
    GM4091334Courtesy of GENERAL MOTORS COMPANY
  5. Connect Heater Outlet Hose (1)
  6. Tighten Heater Outlet Hose Clamp (2)
  7. Install Radiator Inlet Hose@Water Outlet Radiator Inlet Hose Replacement
  8. Install Heater Outlet Hose Vapor Vent Hose Replacement
  9. Fill the cooling system. Cooling System Draining and Filling
scientia non olet · About LEMON Manuals