LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2017 >> Volt Premier >> Repair and Diagnosis >> Electrical >> Charging Systems >> Battery, Charging System And Starting System >> Repair Instructions >> Engine Wiring Harness Junction Block Replacement >> Installation Procedure

Installation Procedure

    Fig 1: Electrical Connectors
    GM4091091Courtesy of GENERAL MOTORS COMPANY
  1. Push down the 3 electrical connectors (1) before installation of the engine wiring harness junction block.
    2. Fig 2: Engine Wiring Harness Junction Block Bolts And Retaining Tabs
    GM4091089Courtesy of GENERAL MOTORS COMPANY
  2. Install the engine wiring harness junction block (2):
    1. Lock the 3 retaining tabs (1) and the retaining tabs (4).
      2. CAUTION:

      Fastener Caution

    2. Tighten the 3 engine wiring harness junction block bolts (3) to 7 N.m (62 lb in).
    3. Fig 3: Engine Wiring Harness Junction Block Supply Nuts
    GM4091088Courtesy of GENERAL MOTORS COMPANY
  3. Install the 2 engine wiring harness junction block supply (2).
  4. Install the engine wiring harness junction block supply nut (1) and tighten to 15 N.m (11 lb ft).
  5. Install the engine wiring harness junction block supply nut (3) and tighten to 5 N.m (44 lb in).
    6. Fig 4: Fitting Release Tabs And Cover
    GM4091087Courtesy of GENERAL MOTORS COMPANY
  6. Install the cover (2).
  7. Check the locked tabs (1).
    8. Fig 5: Plastic Quick Connect Fitting Release Tabs And Cover
    GM4091086Courtesy of GENERAL MOTORS COMPANY
  8. Install the cover (2). Check the locked 3 plastic quick connect fitting tabs (1).
  9. Connect Battery Negative Cable Disconnection and Connection 
scientia non olet · About LEMON Manuals