Installation Procedure
- Position the steering knuckle (1) on the vehicle.
- Install Strut Assembly @ Steering Knuckle. Refer to Strut Assembly Removal and Installation
- Install Front Lower Control Arm @ Steering Knuckle. Refer to Lower Control Arm Replacement
- Install Steering Linkage Outer Tie Rod @ Steering Knuckle. Refer to Steering Linkage Outer Tie Rod Replacement
- Install Front Brake Shield. Refer to Front Brake Shield Replacement
- Install Front Wheel Drive Shaft @ Steering Knuckle. Refer to Front Wheel Drive Shaft Replacement - Left Side , or Front Wheel Drive Shaft Replacement - Right Side
- Install Front Wheel Speed Sensor @ Steering Knuckle. Refer to Front Wheel Speed Sensor Replacement
- Measure and adjust the wheel alignment. Refer to Wheel Alignment Measurement