Driver Seat and Passenger Seat Heater Control Module Scan Tool Information
Heated Seat Module Scan Tool Data Parameters
| Parameter | Expected Value | Definition |
|---|---|---|
| Operating Conditions: Ignition ON | ||
| Driver Seat Back Heat Status | Inactive | The scan tool displays Active/Inactive. This is the state of the driver seat back heat. |
| Driver Seat Cushion Heat Status | Inactive | The scan tool displays Active/Inactive. This is the state of the driver seat cushion heat. |
| Driver Seat HVC Level | Varies | The scan tool displays High, Medium or Low. This is the current level of seat heating as requested by the heated seat switch. |
| Driver Seat HVC Mode | Varies | The scan tool displays Off, Back& Cushion, Back Only, or Cool. This is the current mode of operation for the driver seat. |
| Passenger Seat Back Heat Status | Inactive | The scan tool displays Active/Inactive. This is the state of the passenger seat back heat. |
| Passenger Seat Back Heat Status | Inactive | The scan tool displays Active/Inactive. This is the state of the passenger seat cushion heat. |
| Passenger Seat HVC Level | Varies | The scan tool displays High, Medium or Low. This is the current level of seat heating as requested by the heated seat switch. |
| Passenger Seat HVC Mode | Varies | The scan tool displays Off, Back& Cushion, Back Only, or Cool. This is the current mode of operation for the passenger seat. |
| Seat Heat Supply Voltage | Inactive | The scan tool displays Active or Inactive. Active is displayed when the module commands seat heating ON. |