Inflatable Restraint Passenger Presence System Scan Tool Information
Passenger Presence System Scan Tool Data Parameters
| Parameter | Expected Value | Definition |
|---|---|---|
| Operating Conditions: Ignition ON | ||
| Battery Voltage | Varies | This displays volts. This is the voltage input supplied to the passenger presence system. |
| Passenger Classification | Empty | The scan tool displays Unknown, Calibrating, Empty Seat, Small 1, Small 2, Large or Preload. This is the state of the passenger seat, as monitored by the passenger presence system. |
| Passenger Status | No Info | The scan tool displays No Info., Valid, Invalid Class., Invalid Pos., Invalid Data or Inval. Class& Pos. |
| Power Mode | Run | The scan tool displays Off, Accessory, Run or Crank Request. This is the state of the ignition switch. |
| PPS Enable Status | Enabled | The scan tool displays Disabled or Enabled. This is the status of the PPS Enable. |
| PPS Fault Status | No Fault | The scan tool displays No Fault, Plant Mode, Fault, Mismatch or Barrier. This is the status of the PPS Fault monitor. |
| PPS Primary Key | Varies | The scan tool displays the PPS primary key. |
| Primary Key Status | Valid | The scan tool displays Unknown, Valid or Invalid. This is the state of the primary key. |
| Received Primary Key | Varies | The scan tool displays the primary key received. |
| SDM Enable Status | Enabled | The scan tool displays Enabled or Disabled. This is the state of the SDM. |