LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2017 >> Traverse LS Base >> Repair and Diagnosis >> Steering >> Steering Wheel And Steering Column >> Diagnostic Information and Procedures >> DTC B2860 or B2880: Telescope Position Sensor, Tilt Position Sensor >> Circuit/System Verification

Circuit/System Verification

  1. Ignition ON, observe the scan tool Tilt Sensor and Telescope Sensor parameter. The readings should be between 0.2 and 4.8 volts.
    • If not within the specified range, refer to Tilt/Telescope Sensor Circuit Malfunction.
  2. Command the column to tilt up and down and telescope in and out using the tilt/telescope switch. The column should move in the commanded direction.
    • If the column does not operate as specified, refer to Tilt/Telescope Actuator Circuit Malfunction.
scientia non olet · About LEMON Manuals