LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2017 >> Traverse LS Base >> Repair and Diagnosis >> Steering >> Power Steering System >> Repair Instructions >> Power Steering Gear Inlet Pipe/Hose Replacement >> Removal Procedure

Removal Procedure

  1. Remove the right side catalytic convertor. Refer to Catalytic Converter Replacement - Right Side
  2. Remove as much power steering fluid from the remote power steering fluid reservoir as possible.
  3. Place drain pans under the vehicle as needed.
  4. Disconnect the power steering fluid reservoir outlet hose from the power steering pump. Refer to Power Steering Fluid Reservoir Outlet Hose Replacement 
    5. Fig 1: Power Steering Gear Inlet Hose Bracket Nut & Bolt
    GM1861745Courtesy of GENERAL MOTORS COMPANY
  5. Unclip the power steering fluid reservoir outlet hose from the power steering gear inlet hose bracket.
  6. Remove the power steering gear inlet hose bracket bolt (1).
  7. Remove the power steering gear inlet hose bracket nut (2).
    8. Fig 2: Power Steering Gear Inlet Hose And Fitting
    GM1856747Courtesy of GENERAL MOTORS COMPANY
  8. Disconnect the power steering gear inlet hose (1) from the power steering pump.
    9. Fig 3: Power Steering Gear Inlet Hose Retaining Plate Bolt
    GM1861303Courtesy of GENERAL MOTORS COMPANY
  9. Remove the power steering gear inlet hose retaining plate bolt (1).
  10. Remove the power steering gear inlet and outlet pipe clip bolt (2).
  11. Remove the power steering gear inlet hose from underneath the vehicle.
scientia non olet · About LEMON Manuals