LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2017 >> Traverse LS Base >> Repair and Diagnosis >> Steering >> Power Steering System >> Diagnostic Information and Procedures >> DTC C0450: Steering Assist Control Solenoid Actuator Circuit >> Component Testing

Component Testing

  1. Ignition OFF, disconnect the harness connector at the VES actuator.
  2. Test for 5 - 10 ohms between the control terminals 1 and 2.
    • If not within the specified range, replace the VES actuator.
  3. Test for infinite resistance between each terminal and the VES actuator housing/case.
    • If not the specified value, replace the VES actuator.