Radio Scan Tool Information
Radio Scan Tool Data Parameters
| Parameter | Expected Value | Definition |
|---|---|---|
| Operating Conditions: Ignition ON | ||
| Antenna Module | Enabled | This scan tool displays Enabled or Disabled. This is the state of the antenna module. |
| Auxiliary Audio Input | Present | The scan tool displays Present or Not Present. This is the state of the auxiliary audio input. |
| DRR | Present | The scan tool displays Present or Not Present. This is the state of the DRR. |
| Ign. Cycles Since last DTC | Varies | The scan tool displays the number of ignition cycles since the last DTC. |
| Phone Signal | Present | The scan tool displays Present or Not Present. This is the state of the phone signal. |
| Power Mode | Run | The scan tool displays Off, Accessory, Run or Crank Request. This is the state of the ignition switch. |
| Power Mode Config. | Normal Mode | The scan tool displays Bench Mode or Normal Mode. This is the configuration of the power mode. |
| Signal Strength | Varies | This displays dBuV. This is the signal strength of the radio. |
| Theft Armed | Learned VIN | The scan tool displays Learned VIN or No VIN. This is the state of the VIN programming in the radio. |
| Theft Lock Status | Inactive | The scan tool displays Active or Inactive. This is the state of the theft lock system. |
| Video Display | Varies | The scan tool displays Present or Not Present. This is the state of the video display. |
Radio Scan Tool Output Controls
| Scan Tool Output Control | Description |
|---|---|
| Left Front Speaker | Commanding the speaker ON will turn OFF all speakers except this speaker. Commanding the speaker OFF will turn OFF all speakers. |
| Left Rear Speaker | Commanding the speaker ON will turn OFF all speakers except this speaker. Commanding the speaker OFF will turn OFF all speakers. |
| Right Front Speaker | Commanding the speaker ON will turn OFF all speakers except this speaker. Commanding the speaker OFF will turn OFF all speakers. |
| Right Rear Speaker | Commanding the speaker ON will turn OFF all speakers except this speaker. Commanding the speaker OFF will turn OFF all speakers. |