Installation Procedure
- Install Windshield Wiper Motor
Install Windshield Wiper Transmission Bolt and tighten to 15 N.m (11 lb ft)
- Use the J-39529 Wiper Linkage Installer to install the lower transmission arm to the crank arm.
- Use the J-39529 Wiper Linkage Installer to install the upper transmission arm to the crank arm.
- Align both transmission arms to the crank arm so that they are in a straight arm.
- Install Windshield Wiper Transmission - Windshield Wiper Transmission Replacement
- Verify proper windshield wiper motor operation.
NOTE:
Verify that the alignment of all 3 arms are in the electrically Park position.