LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2017 >> Traverse LS Base >> Repair and Diagnosis >> Accessories & Equipment >> Drivers Assistance Systems - ADAS >> Object Detection System And Pedestrian Protection System >> Repair Instructions >> Rear Parking Assist Alarm Sensor Replacement >> Removal Procedure

Removal Procedure

    Fig 1: Rear Parking Assist Alarm Sensor
    GM1699865Courtesy of GENERAL MOTORS COMPANY
  1. Remove rear bumper fascia. Refer to Rear Bumper Fascia Replacement (Acadia)Rear Bumper Fascia Replacement (Enclave)Rear Bumper Fascia Replacement (Traverse) .
  2. Disconnect electrical from the rear object sensor.
    3. NOTE:

    The rear object sensor is a one piece design. Do NOT twist the sensor cap to try and remove the painted cap. Replacement sensor requires painting to match fascia/bumper body color.

  3. Lift the locking tabs on the housing and remove the rear object sensor.
scientia non olet · About LEMON Manuals