LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2017 >> Traverse LS Base >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Anti-Theft Systems >> Power Door Lock System And Release Systems >> Diagnostic Information and Procedures >> DTC B3265: Hatch Release Output Circuit >> Component Testing

Component Testing

  1. Ignition OFF, disconnect the L/GATE relay.
  2. Test for 60 - 200 Ω between terminals 85 and 86.
    • If not within the specified range, replace the relay.
  3. Test for infinite resistance between the following terminals:
    • 30 and 86
    • 30 and 87
    • 30 and 85
    • 85 and 87
    • If less than the specified range, replace the L/GATE relay.
  4. Install a 3 A fused jumper wire between the relay terminal 85 and 12 V. Install a jumper wire between relay terminal 86 and ground. Test for less than 2 Ω between terminals 30 and 87.
    • If greater than the specified range, replace the L/GATE relay.
scientia non olet · About LEMON Manuals