Fastener Specifications
Single Use Non-Threaded Fasteners/Components
|
NOTE:
All fasteners/components listed in this table MUST BE DISCARDED and replaced with NEW after removal. |
|---|
| Application |
| Front Upper Control Arm Adjust Cam Insert |
Single Use Threaded Fastener/Component Tightening Specifications
|
NOTE:
All fasteners/components listed in this table MUST BE DISCARDED and replaced with NEW after removal. |
|
|---|---|
| Application | Specification |
| Metric (English) | |
| Front Lower Control Arm Front Bolt (Heavy Duty) | Torque Mating Fastener |
| Front Lower Control Arm Rear Bolt (Heavy Duty) | Torque Mating Fastener |
| Front Shock Absorber Stud Nut (Light Duty, With Z85/Z95) | 75 N.m (55 lb ft) |
| Front Shock Absorber Stud Nut (Light Duty, Without Z85/Z95) | 50 N.m (37 lb ft) |
Reusable Threaded Fastener Tightening Specifications
|
NOTE:
All fasteners listed in this table can be reused after removal. |
|
|---|---|
| Application | Specification |
| Metric (English) | |
| Front Lower Control Arm Ball Stud Nut (Heavy Duty) | |
|
50 N.m (37 lb ft) |
|
90 - 100 degrees |
| Front Lower Control Arm Ball Stud Nut (Light Duty) | |
|
50 N.m (37 lb ft) |
|
125 - 135 degrees |
| Front Lower Control Arm Front Nut (Heavy Duty) | 175 N.m (129 lb ft) |
| Front Lower Control Arm Nut (Light Duty) | 175 N.m (129 lb ft) |
| Front Lower Control Arm Rear Nut (Heavy Duty) | 175 N.m (129 lb ft) |
| Front Shock Absorber Bolt (Heavy Duty, Lower Bolt) | 120 N.m (89 lb ft) |
| Front Shock Absorber Bolt (Light Duty, Lower Bolt) | 50 N.m (37 lb ft) |
| Front Shock Absorber Nut (Heavy Duty, Upper Nut) | 65 N.m (48 lb ft) |
| Front Shock Absorber Nut (Light Duty, Upper Nut) | 50 N.m (37 lb ft) |
| Front Stabilizer Shaft Clamp Bolt | 50 N.m (37 lb ft) |
| Front Stabilizer Shaft Link Nut | 23 N.m (17 lb ft) |
| Front Upper Control Arm Ball Stud Nut (Heavy Duty) | 50 N.m (37 lb ft) |
| Front Upper Control Arm Ball Stud Nut (Light Duty) | |
|
50 N.m (37 lb ft) |
|
90 - 110 degrees |
| Front Upper Control Arm Nut (Heavy Duty) | 190 N.m (140 lb ft) |
| Front Upper Control Arm Nut (Light Duty, New Design) | 105 N.m (77 lb ft) |
| Front Upper Control Arm Nut (Light Duty, Old Design) | 190 N.m (140 lb ft) |
| Front Wheel Hub and Bearing Assembly Bolt | 180 N.m (133 lb ft) |
| Torsion Bar Support Assembly Bolt | 125 N.m (92 lb ft) |