LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2017 >> Suburban 3500 HD LS >> Repair and Diagnosis >> Brakes >> Traction Control >> Antilock Brake System >> Repair Instructions >> Brake Pressure Modulator Valve Bracket Replacement >> Removal Procedure

Removal Procedure

  1. Place the ignition switch in the OFF position.
  2. Remove Brake Pressure Modulator Valve. Refer to Brake Pressure Modulator Valve Replacement 
    3. Fig 1: Brake Pressure Modulator Valve Bolt
    GM4138357Courtesy of GENERAL MOTORS COMPANY
  3. Remove Brake Pressure Modulator Valve Bolt (1)
    4. Fig 2: Brake Pressure Modulator Valve Bracket
    GM4138358Courtesy of GENERAL MOTORS COMPANY
    NOTE:

    Do NOT pry on the accumulator caps on the underside of the brake pressure modulator valve.

  4. Remove Brake Pressure Modulator Valve Bracket (1)
  5. Inspect the insulators for damage and replace, if necessary.
scientia non olet · About LEMON Manuals