Circuit/System Verification

DTC C056E 41

1. Ignition ON.
2. Verify that DTC C056E 41 is not set.
   • If the DTC C056E 41 is set 
   1. Program the K43 Power Steering Control Module.
   2. Verify the DTC does not set.
      • If the DTC sets, replace the K43 Power Steering Control Module.
      • If the DTC does not set
   3. All OK.
   • If the DTC C056E 41 is not set 
3. All OK.

DTC C056E 4B

1. Ignition ON.
2. Verify that DTC C056E 4B is not set.
   • If the DTC C056E 4B is set 
   1. Program the K43 Power Steering Control Module.
   2. Verify the DTC does not set.
      • If the DTC sets, replace the K43 Power Steering Control Module.
      • If the DTC does not set
   3. All OK.
   • If the DTC C056E 4B is not set 
3. All OK.